Tips on Removing an Old Toilet from Your Bathroom

Tips on Removing an Old Toilet from Your Bathroom

Sometimes, working with pipes can be nasty business, especially when it comes

to your bathroom toilet plumbing. When it’s time to replace your toilet, removing

the old one from its spot in the bathroom can be a bit unpleasant. However, it’s

also a relatively simple job, one that you should be able to complete yourself

without calling a plumber. Read on for tips on how to get an old toilet out of the

bathroom without making a horrific mess.

 

Removing the Remaining Water

 

The first thing you need to do before you pull out the old toilet is to turn the water

off. In most cases, you can shut a valve on the toilet’s supply line so you don’t

have to bother shutting down the water to the entire home. Next, once the water is

off, flush the toilet so the tank empties out. If any residual water remains inside,

mop it out. Make sure the tank is completely empty to save you from cleaning up

a nasty mess.

 

Once the tank is dry, you can disconnect the supply line – most toilets require a

wrench for this step. Next, if there’s any water left in the bowl, suck it out with a

wet-dry vac. Alternatively, you can use a sponge to remove the remaining water if

you’re willing to stick your hand in the bowl. Once all the water is gone and the

bathroom toilet plumbing is completely disconnected, you’re ready to start the

physical removal process.

 

Saying Goodbye to a Good Toilet

 

To actually get the toilet out of the bathroom, you need to unbolt it from the floor

first, which can be difficult if it’s been in place for years and the bolts have

become rusted or stuck in place. Try a wrench, but if that doesn’t work, you can

always just hacksaw the bolts apart since you’ll be getting replacements with the

new toilet anyway. Some toilets allow you to unbolt the tank from the bowl,

which can be equally challenging, but will make it easier to carry the pieces away

when you’re finished.

 

Finally, with the bolts out of the way, start rocking the toilet until it comes free of

the wax ring on the floor. Don’t rock too vigorously, or you may shake out some

water that remains hidden in the bathroom toilet plumbing – not a pleasant

outcome. When the toilet is loose, you can haul it away, and all that’s left is to

take the wax ring out of the floor and clean up any mess or residue. If you aren’t

prepared to install your new toilet immediately, it’s also a good idea to put a rag

or cover on the exposed soil pipe so nasty sewer gases don’t flow up into the

bathroom.

 

Proven Experts at Bathroom Toilet Plumbing

 

Sometimes, when you’re DIYing a repair, things get out of hand. You might not

be able to free the toilet from its base, or you could break the top of the soil pipe

during the removal process. If that’s the case, you may need a professional

plumber to come bail you out. When you do need help with your bathroom toilet

plumbing call Churchwell Plumbing.

Submit a Comment

Visit Us On TwitterVisit Us On FacebookVisit Us On Google Plus